4-channel amplifier with integrated active crossover (Class AB)
4 x 65 / 130 Watts @ 4 Ohms 4 x 90 / 180 Watts @ 2 Ohms 2 x 180 / 360 Watts @ 4 Ohms bridged Inputs: 4 x RCA, 4 x Smart highlevel input with ADEP circuit (Advanced Diagnostics Error Protection) and Auto Turn-On function, Remote control input Fully active crossover with highpass, lowpass, bandpass and bass boost Dimension: 53 x 320 x 230 mm / 2.09 x 12.60 x 9.06”.
@ 4 Ohms 4 x 100 W RMS, 200 W Peak @ 2 Ohms 4 x 100 W RMS, 200 W Peak bridged @ 4 Ohms 2 x 200 W RMS, 2x400 W Peak
Amplifier technologyClass D Inputs4 x RCA 4 x Highlevel speaker input 1 x Remote In Input sensitivity RCA 0.5 - 6 Volts Highlevel input sensitivity 1.3 - 13 Volts Input impedance RCA 20 kOhms Input impedance highlevel 13 Ohms Outputs4 x Speaker output
Frequency response10 Hz - 30 000 Hz Highpass15 Hz - 4000 Hz adjustable Lowpass40 Hz - 4000 Hz adjustable Bandpass15 Hz - 4000 Hz adjustable Slope high- / lowpass12 dB/Oct. Signal-to-noise ratio analog input98 dB (A-weighted) Distortion (THD)0.05 % Damping factor100 Operating voltage10.5 - 16 Volts (max. 5 sec. down to 6 Volts) Idle current1,100 mA Fuse2 x 30 A Maxi-fuse (APX) Start-Stop capability Highlevel input with automatic turn on function Advanced Diagnostics Error Protection (ADEP) Dimensions (H x W x D)50 x 230 x 154 mm.
Output power RMS - @ 4 OhmsHighPower mode: 4 x 60 Watts MidPower mode: 4 x 35 Watts - @ 2 Ohms- - @ 1 Ohm- - bridged @ 4 Ohms- - bridged @ 2 Ohms- - Subwoofer output @ 4 OhmsHigh- and MidPower mode: 1 x 90 Watts - Subwoofer output @ 2 OhmsHigh- and MidPower mode: 1 x 160 Watts Amplifier technologyClass GD Inputs4 x Highlevel speaker input 1 x Optical SPDIF (12 - 96 kHz) 1 x Remote in Input sensitivity5 - 11 Volts Input impedance RCA / Cinch- Input impedance highlevel9 - 33 Ohms with ADEP.3 Outputs 5 x Speaker output 4 x RCA / Cinch 1 x Remote Out
Output voltage RCA / Cinch3 Volts Frequency response20 Hz - 20,000 Hz DSP resolution64 Bit DSP power295 MHz (1.2 billion MAC operations/second) Sampling rate48 kHz DSP typeAudio signal processor Signal converters A/D: BurrBrown D/A: BurrBrown
Signal-to-noise ratio digital input 105 dB (A-weighted) Signal-to-noise ratio analog input 99 dB (A-weighted) Distortion (THD) 0.03 % Damping factor 50 Operating voltage10.5 - 17 Volts (max. 5 sec. down to 6 Volts) Power ratingDC 12 V ⎓ 40 A max. Idle current280 mA Max. remote output current500 mA Fuse1 x 30 A Maxi-fuse (APX) Additional features32 Bit CoProcessor, ADEP.3 circuit, Auto Remote switch, Smart Control Port, Start-Stop capability, USB Dimensions (H x W x D)35 x 85 x 110 mm / 1.34 x 3.35 x 4.33″ Scope of delivery 1 x MATCH micro amplifier M 5.4DSP 1 x Control Input-to-SCP adaptor 1 x USB cable 1 x Connection cable PP-IOC (0.50 meter) 1 x Subwoofer connection cable PP-SOC (0.45 meter) 1 x Line Output-to-RCA cable 1 x Mounting material 1 x Instruction manual.
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.Ok